Chapter 1 - Important Safety Information - Honeywell Touchpoint Plus Wireless Technical Handbook

MAN0984_Iss 2_02/19
3020M5001_2
Chapter 1 – Important Safety Information
The Equipment referred to in this manual contains components and assemblies that are each certified for use in a
variety of differing environments, and it is the site owner's responsibility to confirm the suitability of the equipment prior
to its installation and use.
The Equipment assemblies referred to in this manual are collectively certified for use in a flammable gas detection
system only. Any other use is not currently certified and is not authorised by the manufacturer.
Check the product rating plate and look for the following marks to ensure that the supplied equipment is suitable for its
intended location and purpose:
Products bearing the CE mark conform to all applicable European Directives as stated on the Honeywell
product specific EC Declaration of Conformity.
Products bearing the UL mark conform to the requirements for Ordinary Locations. The letters C and US
mean that the product is certified for use in Canada and the United States of America.
FOR SAFETY REASONS THIS EQUIPMENT MUST BE OPERATED BY QUALIFIED PERSONNEL ONLY.
READ AND UNDERSTAND THE INSTRUCTION MANUAL COMPLETELY BEFORE OPERATING OR
POUR DES RAISONS DE SÉCURITÉ, CET ÉQUIPEMENT DOIT ÊTRE UTILISÉ, ENTRETENU ET RÉPARÉ
UNIQUEMENT PAR UN PERSONNEL QUALIFIÉ. ÉTUDIER LE MANUEL D'INSTRUCTIONS EN ENTIER
Important Safety Information
AVANT D'UTILISER, D'ENTRETENIR OU DE RÉPARER L'ÉQUIPEMENT.
WARNING
SERVICING THE EQUIPMENT.
ATTENTION
1
Touchpoint Plus Wireless
Technical Handbook