Conditions Of Use; Training Of Personnel; Conditions Satisfying Local, National And International Safety Regulations; Due Authorisation - Honeywell Touchpoint Plus Wireless Technical Handbook

MAN0984_Iss 2_09/19
3020M5001_2
Safety Hazards, Warnings And Cautions

2.5 Conditions of Use

This Touchpoint Plus Wireless equipment should only be operated under the following circumstances:
•
By properly trained personnel.
•
Under approved conditions.
•
With due authorisation.
•
Using approved maintenance and servicing procedures.

2.5.1 Training of Personnel

Honeywell and / or its distributors can provide training for operators and maintenance personnel. Personnel
who have been trained in operation and maintenance shall be limited to carrying out only those procedures
and tasks taught during the training course. Honeywell certified maintenance technicians must carry out all
other tasks.
Honeywell can also provide additional or advanced training. Retraining is recommended periodically and
whenever equipment is upgraded.

2.5.2 Conditions Satisfying Local, National and International Safety Regulations

Approved conditions must satisfy the requirements of applicable national and international safety standards
and statutory requirements relating to electrical, EMC, and health hazards. In addition, they must satisfy the
requirements of the Site Safety Officer and the local safety regulations.

2.5.3 Due Authorisation

Before any production, maintenance, or servicing procedure is carried out; written authorisation must be
obtained from one of the following personnel to confirm that the proposed task satisfies the necessary safety
conditions:
•
A competent authorised person having a professional qualification in an appropriate technical discipline.
•
The Factory, Technical or Engineering Manager responsible for the working area.
•
The Site Safety Officer or an authorised Honeywell representative or approved distributor.

2.5.4 Approved Maintenance and Servicing Procedures

Approved Maintenance and Servicing Procedures are those stipulated in this manual or as authorised
separately by Honeywell.
It may be necessary to establish a temporary Locally Controlled Area (LCA) to restrict access during
maintenance, testing or service of this equipment.

2.6 Security Guide

Establishing an Ethernet connection to Touchpoint Plus Wireless may expose the system to vulnerabilities.
Honeywell recommends against connecting Touchpoint Plus Wireless to untrusted computers or equipment
without taking appropriate measures to ensure security.
11
Touchpoint Plus Wireless
Technical Handbook