MAN0984_Iss 2_09/19
3020M5001_2
7.5 Commission Input / Output Modules
Note: Service or higher level access is required
1) Login as an Service or higher
2) Select Menu > Configuration > H/W Module Control panel
3) Select an IO module (a blue block) and touch 'Add'. Select one of the listed I/O Module types.
4) Repeat for other installed IO Module.
Note: Sky blue blocks show newly installed (i.e. uncommissioned) or decommissioned modules.
Note: To remove a module, Select the Module on the screen and then touch 'Remove'. To replace it with new
same type of IO Module, touch 'Replace'.
Commissioning
59
Touchpoint Plus Wireless
Technical Handbook