MAN0984_Iss 2_09/19
3020M5001_2
Electrical Power And Interfacing
5.2.8 Antenna Installation
Install the antenna by screwing it onto TPPLW towards the right.
5.2.9 Antenna Extension Connection
Do not disconnect equipment unless power has been removed or the area is known to be non-hazardous.
For antenna extension, use 10 m antenna extension cable (PN: TPPLWOCBL). If an extension antenna is to
be used outdoors, especially if it is to be located in an area prone to lightning, a coaxial lightning surge
protector must be installed inline between the antenna and TPPLW.
Refer to the end of Ch.5.2.6 Grounding for instructions on installation of lightning surge protection.
WARNING – EXPLOSION HAZARD
34
Touchpoint Plus Wireless
Technical Handbook