Date, Time And Language Settings; How To Set Or Change Date, Time And Language Settings; Program Passwords - Honeywell Touchpoint Plus Wireless Technical Handbook

MAN0984_Iss 2_09/19
3020M5001_2

7.3 Date, Time and Language Settings

Note: You should replace the coin battery if date and time are not retained after power-cycle
Note: Check regularly that the date and time set for TPPLW are correct, adjust the date and time if needed.

7.3.1 How to Set or Change Date, Time and Language Settings:

1) Login with the Service engineer level and default password is 'TPPL' for all access levels.
2) Touch the Login icon in the navigation bar and a login will appear for the access level and Password.
3) From the navigation bar select Menu > Configuration > General > Date/Time.
4) Set the date, time and display format as required.
5) Touch Finish.
Note: Touchpoint Plus Wireless does not adjust automatically for daylight savings time so Touchpoint Plus
Wireless will retain a backup of the earlier data if the clock is backdated (i.e. when ending daylight savings
time).

7.4 Program Passwords

Note: Administrator level access is required to create an Administrator level password. Service level access
can create or amend lower levels of password.
Note: Passwords are case sensitive
The following rules apply to user passwords:
•
Three password protected levels and one non-password level are available.
•
The password must be minimum 8 characters long
•
The password must contain a mix of letters, numbers and symbols.
•
The password must contain a lower and an upper characters
1) Login with a valid Service or Administrator level.
2) Select Menu icon > Configuration > Security > Password.
3) Select an access level icon and input currently logged user's password, new password and confirm
password.
4) Touch Change.
Note: Require help from your service contact if you forget a password. The details should have been entered
in the Touchpoint Plus Wireless software during commissioning.
Careless password management can cause unauthorized access to the system which can case security
Commissioning
Please change the password once you receive TPPLW.
problem and this is user's responsibility.
If you forget you password please contact Honeywell Analytics service.
To recover your password please contact Honeywell Analytics service.
58
CAUTION
CAUTION
Touchpoint Plus Wireless
Technical Handbook