Accessing The System Information And Service Contact Details; System State Relays - Honeywell Touchpoint Plus Wireless Technical Handbook

MAN0984_Iss 2_09/19
3020M5001_2

6.13 Accessing the System Information and Service Contact Details

Select Menu > Information > System information > About to view details about the Firmware, Software and
serial numbers.
Select Menu > Information > Service Contact for details of how to access technical support.

6.14 System State Relays

The Main Module has three System State relays, rated at 30 VDC, 3 A or 250 VAC, 3 A, that activate under
the following conditions:
•
One or both System-State relays can activate if there is any active alarm, fault, warning or inhibit in the
system (if configured)
•
The System-Failure relay can activate if the safety function of the system is not operating, for example
due to a major fault or power loss
Operating Instructions
56
Touchpoint Plus Wireless
Technical Handbook