Wall Mount Fixings - Honeywell Touchpoint Plus Wireless Technical Handbook

MAN0984_Iss 2_09/19
3020M5001_2
System Mechanical Installation

4.2.1 Wall Mount Fixings

You will require the following locally sourced items to install the Touchpoint Plus Wireless:
Tool to undo the enclosure access handle security screws:
•
3 mm Hex key
Suggested Fixings to screw the enclosure to the wall only:
•
Screw Max. Dia:
•
Screw Min. Length:
•
Washer Max. Dia:
Note: The sizes above are given to allow for clearance in TPPLW Enclosure. The actual length and type of
fixing should be determined by the surface material and the type of anchor required.
Suggested Fixings for using the Mounting Plate:
For the plate, choose fixings appropriate to the surface and the weight of the enclosure plus cables. You will
also need to use suitable bolts, washers and lock nuts (see diagram below).
6.4 mm (#14) dome or cheese head screw
76 mm (3 in.) – Normal fix
14.3 mm (0.56 in.)
21
Touchpoint Plus Wireless
Technical Handbook