Siemens SINAMICS S120 Commissioning Manual page 70

Prerequisites for commissioning
2.4 STARTER commissioning tool
Graphical screen interface
When carrying out BICO interconnection via the graphical screen interface, proceed as
follows:
For the set velocity, which is a 32-bit data type, you want to interconnect p parameter p1155
[0] for "Speed setpoint 1" with r parameter r8860 [1], for example.
Figure 2-11
1. In the project navigator under Drive_1 > Open-loop/closed-loop control, double-click the
70
Interconnection via graphical screen interface 1
selection Setpoint addition.
Figure 2-12 Interconnection via graphical screen interface 2
Commissioning Manual, (IH2), V2.6, 10/2008 Edition, 6SL3097-2AA00-0BP3
CANopen interface