Siemens SINAMICS S120 Commissioning Manual page 7

Standard scope
This documentation only describes the functionality of the standard version. Extensions or
changes made by the machine tool manufacturer are documented by the machine tool
manufacturer.
Other functions not described in this documentation might be able to be executed in the drive
system. This does not, however, represent an obligation to supply such functions with a new
control or when servicing.
For the sake of simplicity, this documentation does not contain all detailed information about
all types of the product and cannot cover every conceivable case of installation, operation, or
maintenance.
Technical Support
If you have any questions, please get in touch with our Hotline:
Phone
Fax
Internet
Phone
Fax
E-mail
Phone
Fax
E-mail
Note
Country telephone numbers for technical support are provided under the following Internet
address:
http://www.siemens.com/automation/service&support
Calls are subject to charge (e.g. € 0.14/min from fixed lines within Germany).
Tariffs of other telephone service providers may vary.
CANopen interface
Commissioning Manual, (IH2), V2.6, 10/2008 Edition, 6SL3097-2AA00-0BP3
+49 180 5050 - 222
+49 180 5050 - 223
http://www.siemens.de/automation/support-request
+1 423 262 2522
+1 423 262 2200
mailto:techsupport.sea@siemens.com
+86 1064 719 990
+86 1064 747 474
mailto:adsupport.asia@siemens.com
Europe / Africa
Americas
Asia/Pacific
Preface
7