7.1 Configuring Port Priority
Select Control Policy > Port Priority.
Step 1
Select from the Priority and Trust Mode.
Step 2
Trust mode includes four types of Untrust, 802.1P, DSCP, and DSCP & 802.1P.
Step 3
Click OK.
7.2 Configuring Priority Mapping Table
Step 1
Select Control Policy > Priority Mapping Table.
Step 2
Select DSCP > Local Priority or 802.1p > Local Priority.
Step 3
Select Output Value.
The input value and the output value vary from different modes.
Step 4
Click OK.
7.3 Configuring Queue Scheduling
Step 1
Select Control Policy > Queue Scheduling.
Step 2
Select from the Queue Algorithm.
7 Control Policy
Figure 7-1 Configure port priority
30