Huawei FusionServer Pro CH121 V5 User Manual page 112

FusionServer Pro CH121 V5 Compute Node
User Guide
Step 6 Check whether a PCIe card is installed.
l
l
Step 7 Remove the PCIe card.
For details, see
Step 8 Take the spare part out of its ESD bag.
Step 9 Determine the position of the processor.
Figure 5-11 Positions of processors
Step 10 Install the processor on the carrier.
1.
2.
Issue 06 (2019-08-10)
If yes, go to Step 7.
If no, go to Step 8.
3.11 Removing a PCIe
Take a processor carrier out of an ESD bag.
Aligning the notch in one edge of the processor with the protrusion on the processor
carrier, secure it.
Ensure that the processor corner with a triangle mark is in the corner of the processor
carrier with a notched triangle.
Copyright © Huawei Technologies Co., Ltd.
Card.
5 Optional Part Installation
104