Configuration Overview - Huawei FusionServer Pro CH121 V5 User Manual

FusionServer Pro CH121 V5 Compute Node
User Guide

4.3.2 Configuration Overview

Configuration Process
Figure 4-5 Initial configuration process
Table 4-3 Process description
Step
Change the initial
passwords
Check the compute node
Set the iBMC IP address
Configure RAID
Configure the BIOS
Install the OS
Issue 06 (2019-08-10)
Description
Initial password of the default iBMC user
l Ensure that the compute node version meets site
requirements.
l Ensure that no alarm is generated for the compute node.
Set an iBMC IP address for the compute node
Configure the corresponding RAID array based on service
scenarios.
Configure the BIOS of the compute node, including the boot
mode, NIC PXE function, and BIOS password
Install an OS for the compute node
Copyright © Huawei Technologies Co., Ltd.
4 Installation and Configuration
77