Logging In To A Compute Node Using Mm910 Sol - Huawei FusionServer Pro CH121 V5 User Manual

FusionServer Pro CH121 V5 Compute Node
User Guide

12.5 Logging In to a Compute Node Using MM910 SOL

Scenarios
Access a compute node in an E9000 server using the SOL function provided by the MM910.
Only one serial port connection can be set up by using SOL at a time. Therefore, you are
advised to exit the SOL screen after operation.
Procedure
Step 1 Log in to the MM910 CLI by using an SSH tool and the floating IP address of the MM910.
PuTTY is used as an example. For details, see
over a Network
Step 2 Log in to the SOL CLI.
telnet 0 1101
The command output is as follows:
*=====================================================================*
*
*
*=====================================================================*
user name:
Step 3 Enter the user name and password.
The CLI for selecting a slot is displayed.
Log in Success!
*=================================================================================
==========================
Swi1~Swi4(33 ~ 36) and COM#(n)
*=================================================================================
==========================
Blade1~Blade16(1 ~ 16)
Blade1A~Blade16A(17 ~ 32)
Swi1~Swi4(33 ~ 36)
Please input your choice:
The numbers in the preceding information are described as follows:
l
l
Issue 06 (2019-08-10)
Port.
Welcome to SMM SOL Server
Please log in with SMM account and password.
NOTE
The default user name of compute nodes is Administrator, and the default password is Admin@9000.
please input the SOL Blade1~Blade16(1 ~ 16), Blade1A~Blade16A(17 ~ 32),
press Ctrl+R to return
1 to 32 indicate the compute nodes in slots 1 to 32, respectively.
33 to 36 indicate the switch modules in slots 1E, 2X, 3X, and 4E, respectively.
Copyright © Huawei Technologies Co., Ltd.
12.8.1 Logging In to the CLI Using PuTTY
12 Common Operations
*
*
145