Huawei FusionServer Pro CH121 V5 User Manual page 56

FusionServer Pro CH121 V5 Compute Node
User Guide
Procedure
Step 1 Take the spare part out of its ESD bag.
Step 2 Determine the slot and position of the drive.
For details, see
Figure 3-23 Positions of drives
Step 3 Remove the drive filler.
Step 4 Install a drive.
1.
2.
Issue 06 (2019-08-10)
2.4.1 Drive Configurations
NOTE
Perform this operation only when a drive filler is installed.
Fully open the ejector lever and push the drive into the slot as far as it will go. See (1) in
Figure 3-24.
Ensure that the ejector lever is fastened to the chassis beam, and then close it to
completely insert the drive into the slot. See (2) in
Copyright © Huawei Technologies Co., Ltd.
and 2.4.2 Drive Numbering.
Figure 3-24.
3 Basic Operations
48