Huawei FusionServer Pro CH121 V5 User Manual page 119

FusionServer Pro CH121 V5 Compute Node
User Guide
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see
Step 5 Remove the air duct.
For details, see
Step 6 Check whether a PCIe card is installed.
l
l
Step 7 Remove the PCIe card.
For details, see
Step 8 Take a spare memory module.
Step 9 Check the positions and installation guidelines of the memory modules.
For details, see
Figure 5-22 Memory slots
Step 10 Install the memory module.
1.
2.
Issue 06 (2019-08-10)
3.3 Removing a CH121
3.5 Removing the
3.7 Removing the Air
If yes, go to Step 7.
If no, go to Step 8.
3.11 Removing a PCIe
2.3.5 Memory Installation
Open the two memory module ejectors on the memory slot.
Figure 5-23 Opening the memory module ejectors
Align the edge connector of the memory module with the alignment key of the memory
slot, and insert the memory module in the slot.
Copyright © Huawei Technologies Co., Ltd.
V5.
Cover.
Ducts.
Card.
Positions.
5 Optional Part Installation
111