Huawei FusionServer Pro CH121 V5 User Manual page 104

FusionServer Pro CH121 V5 Compute Node
User Guide
Step 9 Install the RAID controller card.
1.
2.
Figure 5-4 Installing a screw-in RAID controller card
Step 10 Check whether a supercapacitor is configured.
l
l
Step 11 Install the supercapacitor.
For details, see
Step 12 Check whether a PCIe card is installed.
l
l
Step 13 Install the PCIe card.
For details, see
Step 14 Install the cover.
For details, see
Step 15 Install the compute node.
For details, see
Step 16 Power on the compute node.
For details, see
Step 17 Configure the RAID controller card.
The following uses the LSI SAS3008IR RAID controller card as an example.
1.
Issue 06 (2019-08-10)
Insert the RAID controller card vertically into the connector on the mainboard. See (1) in
Figure 5-4.
Tighten the screws to secure the RAID controller card. See (2) in
If yes, go to Step 11.
If no, go to Step 12.
5.2.5 Installing the
If yes, go to Step 13.
If no, go to Step 14.
3.12 Installing a PCIe
3.6 Installing the
3.4 Installing a CH121
3.2 Power-On
Log in to the Configuration Utility.
For details, see LSI SAS3008IR> Initial Configuration (Legacy/Dual Mode) or Initial
Configuration (EFI/UEFI Mode) > Logging In to the Configuration Utility in
Huawei V5 Server RAID Controller Card User
Copyright © Huawei Technologies Co., Ltd.
Supercapacitor.
Card.
Cover.
V5.
Procedure.
5 Optional Part Installation
Figure 5-4.
Guide.
96