FusionServer Pro CH121 V5 Compute Node
User Guide
4.
Issue 06 (2019-08-10)
Figure 5-19 Installing the heat sink
Install the heat sink.
– Intel heat sink
i.
Use a T20 Torx screwdriver to tighten the two diagonal screws (marked 1 on
the label) on the heat sink. See (1) in
ii.
Use a T20 Torx screwdriver to tighten the two diagonal screws (marked 2 in
the label) in the middle of the heat sink. See (2) in
Figure 5-20 Installing the heat sink
– Huawei-developed heat sink
i.
Use a Phillips screwdriver to tighten the two diagonal screws (marked 1 on the
label) on the heat sink. See (1) in
Copyright © Huawei Technologies Co., Ltd.
5 Optional Part Installation
Figure
5-20.
Figure
Figure
5-21.
5-20.
109