FusionServer Pro CH121 V5 Compute Node
User Guide
4.2.4 Installing the Compute Node
Procedure
Step 1 Install the CH121 V5.
For details, see
----End
4.2.5 Connecting to Network
To connect the E9000 to the network, install switch modules for signal management between
the compute node and external network.
For details about the switch module, see the
The NIC configured for the compute node must match the switch module configured for the
chassis. Otherwise, the network connection may fail.
4.3 Initial Configuration
4.3.1 Default Information
Table 4-2 Default information
User Name
Administrat
or
Issue 06 (2019-08-10)
3.4 Installing a CH121
User
Default
Descriptio
Password
n
An iBMC
Admin@900
user
0
NOTE
iBMC does
not have a
default IP
address.
Copyright © Huawei Technologies Co., Ltd.
V5.
user guide
of the switch module you use.
User Type
Administrati
ve User
4 Installation and Configuration
User Status
Login
Method
Enabled
Remote and
local login
75