Huawei FusionServer Pro CH121 V5 User Manual page 52

FusionServer Pro CH121 V5 Compute Node
User Guide
Step 5 Remove the air duct.
For details, see
Step 6 Remove the PCIe card front panel.
For details, see
Step 7 Take the spare part out of its ESD bag.
Step 8 Determine the position of the PCIe card.
Figure 3-19 Position of the PCIe card
Step 9 Install the PCIe card.
1.
2.
3.
Issue 06 (2019-08-10)
3.7 Removing the Air
3.9 Removing the PCIe Card
Slide the PCIe card into the PCIe card bracket as far as it will go and ensure that the edge
of the PCIe card is flush with the PCIe card bracket. See (1) in
Install the PCIe card bracket. Ensure that the PCIe card connectors align with the
connectors on the mainboard and the screw holes on the PCIe card filler panel align with
the screw holes on the front panel. See (2) in
Tighten the three screws to secure the PCIe card bracket. See (3) in
Copyright © Huawei Technologies Co., Ltd.
Ducts.
Panel.
Figure 3-20.
3 Basic Operations
Figure 3-20.
Figure 3-20.
44