Huawei FusionServer Pro CH121 V5 User Manual page 58

FusionServer Pro CH121 V5 Compute Node
User Guide
Step 1 Determine the slot and position of the drive.
Figure 3-25 Positions of drives
Step 2 Check the running status of the drive by observing its indicators.
For details, see
Step 3 Determine whether the drive needs to be removed.
l
l
Step 4 Remove the drive.
1.
2.
3.
Issue 06 (2019-08-10)
NVMe SSD
If yes, go to Step 4.
If no, rectify the drive fault.
Press the ejector release button on the drive panel to release the ejector lever. See (1) in
Figure 3-26.
Open the drive ejector lever completely. See (2) in
Holding the ejector lever of the drive, pull out the drive for about 3 cm (1.18 in.). Wait
for at least 30 seconds and remove the drive from the server. See (3) in
Do not insert or remove drives frequently. If a drive is frequently removed and installed
in an interval shorter than 30 seconds, there are risks that the drive cannot be identified.
Copyright © Huawei Technologies Co., Ltd.
Indicators.
3 Basic Operations
Figure 3-26.
Figure 3-26.
50