Supervision Process, Plans And Installation Communication Problems - TouchWand Wanderfull User Manual

Supervision process, plans and installation communication problems

To avoid potential network problems or at least to solve potential network problems, the
electrician should be required to install closed electrical boxes in problem areas. If you go to
the installation and there are network problems because of the remote location of the
controller, you must put repeater units along the way to the remote units.
After the house is already built to cut concrete for electric boxes, this is a major problem and
can cause a serious problem in the process.
When there is a basement and there is a desire to put Z-Wave units down in the basement
and there is a barrier to the grid, it is therefore necessary to plan electrical programs and
install down stairs boxes of electricity that will allow the installation of InWand rectifiers.
When you have setup a large network that has more than 10 or 15 units, you should Check
the network stability.
Do not dispose the electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information
! Warnings!
Do not modify the unit in any way.
Risk of electrical shock.
Risk of fire.
Risk of burns.
regarding the collection systems available.
Wanderfull Technical Manual
91