Table of Contents
Advertisement
should enter the IP address, port, password and upload a CSV file. Then click on the Save
button.
Once connected, Risco initial status is disarmed. To arm the alarm, click on the Arm button
located below the unit's status.
Every time you would like to disarm the alarm, you must enter a password. For example, in
the Setting tab click on the Disarm button. Another screen appears where the password
should be entered.
-
Disarming Risco in the Settings tab
-
Disarming Risco in the Dashboard
Wanderfull Technical Manual
68
Advertisement
Table of Contents
