Table of Contents
Advertisement
If a secondary type is selected, you have to enter the following details:
- Primary IP address
- Primary username
- Primary password
- Primary mac address
There is an option to include these settings by clicking on the Save button or go to the
primary controller by clicking on the Go to master button.
In order to add secondary controller to the primary, you must login to the primary
controller and in the Units tab press Add Unit button. Another page will appear on the
screen from which you should select the Wanderfull controller and click on the Pair button.
After selecting the controller unit, enter your username, password and name and click on
the Pair button.
Wanderfull Technical Manual
77
Advertisement
Table of Contents
