• Dahua Camera
Implement the following steps to install a Dahua camera in the application.
1. Login to the camera's IP via internet explorer. Follow the instructions and install
the plug-in.
2. Go to Settings tab
3. Go to Video
4. In Main Stream, compare settings with the following and press save in the end:
5. Now you can add the camera to the Wanderfull controller.
6. Go to units and add unit.
7. Select IP camera (ONVIF) → Local and insert username and password.
8. The camera is now added to the controller. You can assign it to a room and give it a
meaningful name.
Wanderfull Technical Manual
29