Table of Contents
Advertisement
Set up the management system
The management system is divided into 5 parts:
• Dashboard - the place where the customer meets with the system and performs most
of its activities.
• Rooms - rooms / offices, etc.
• Scenarios - the way in which the customer adapts the operations to his needs.
• Units - the types of units connected to the system, the way they connect and their
names and status (on/off).
• Settings
Each part of the system is configured independently and connected to the other parts.
It is very important to define the system fully before leaving the site by the installer.
This booklet or its summary must be left in the customer's hands so that he can perform
activities and settings independently to suit his needs.
The application logs off automatically after 30 minutes of inactivity!
Dashboard
The first page when entering the application is the Dashboard. The Dashboard can be
edited according to the customer's preferences at any given moment!
Dashboard interface while using a computer
When logged in, initially the Dashboard is displayed. The dashboard is divided into several
parts:
• If you've enabled the energy options located in General settings under Energy Options,
the energy consumption will be displayed at the top to right of the screen. In this part,
you'll be able to see calculated energy cost per month, energy consumption and status.
• Three different status icons (cloud, lamp icon for the devices and turn off button)
indicate that:
If the cloud icon is green, then the controller is connected through the Internet.
-
If the cloud icon is red, then the controller is locally connected.
-
• On the right side are all types of scenarios in the house,
• Once a thermostat is paired, the thermostat widget is displayed on the left and can be
seen under Temperature
the thermostat widget has the possibility to turn the thermostat (AC) ON/OFF
-
by clicking on the slider next to the OK button, set the temperature with the
temperature slider, see the actual room temperature and set the AC fan
speed: low, medium, high or auto.
If you click on the thermostat name, which is located under the temperature
-
slider in the thermostat widget, the application will redirect you to the unit in
Units tab.
By clicking on All units in the thermostat widget, a list of all thermostat units
-
will appear that are connected to the controller.
Wanderfull Technical Manual
12
Advertisement
Table of Contents
