Adding Risco Sensors - TouchWand Wanderfull User Manual

Once the unit is added, Risco will appear in the Units list with the rest of the devices.
You will be able to control the unit, view its status (disarmed or armed), assign it to a
room, a group or mark as favorite.

Adding RISCO sensors

In the Units tab click on the Add unit button to add a Risco sensor. In the new page,
select the Risco sensor then select the type (RISCO Doors & windows, RISCO motion
sensor, RISCO Flood sensor, RISCO Smoke sensor), name and zone. Then click on the Pair
button.
After the Risco sensor is added, in the Units tab the you can see the unit's status. In the
example below, the door sensor status log changes whenever the door is opened or
closed.
Wanderfull Technical Manual
69