TouchWand Wanderfull User Manual page 61

There is an option now to enter physical address of the KNX IP router. When no address
-
entered, the default will be 15-15-15.
When connecting the KNX system, the connection can be activated in two ways:
• A direct connection in which the KNX IP address is required.
A direct connection can be required when some of the home internet
-
routers/switches block the multicast messages inside the LAN, and the best
solution is direct connection.
• Connection by means of a multicast. The multicast connection type is a connection in
which the KNX router listen/sends events to specific reserved IP address, additionally
to direct connections (if they exist).
We recommend that the standard installer use the direct connection setting and not
allow the system to find the IP-KNX unit on its own.
If the connection with KNX does not reflect a unit's status, change the connection type
from multicast to direct, adding the KNX IP adaptor address in the IP field.
Wanderfull Technical Manual
61