Table of Contents
Advertisement
The actions can be applied for any kind of unit in the system (as seen in the pictutre). In
addition, you can define a notification to be sent by e-mail. By clicking on Add another you
can set more than one action for each scenario.
For each action chosen, you can set a delay that starts after the scenario's condition is
triggered. For example, for a "morning" scenario, you can set the blinds to open up to 50%
once the scenario starts, and after 15 minutes the bedroom lights will turn on.
After definening the required details, press Submit at the bottom right of the screen.
Then, to activate the scenario, click on the slider next to its name. When the slider is green,
the scenario is activated.
Wanderfull Technical Manual
39
Advertisement
Table of Contents
