General ................................3 Safety Precautions ............................3 ACWand Installation ............................. 4 How to add ACWand units to Wanderfull controller ..................6 Specifications & Part Numbers ........................7 List of Air conditions supported by ACWand ....................8 Page 2 of 8...
This Wi-Fi enabled transceiver is fully compatible with any Wi-Fi network. It is compatible with most of the known air conditioners in the market. You can use the ACWand to control your AC through the TouchWand app to turn it on/off, change between cool/heat modes, fan modes and control the temperature.
ACWand Installation 1. Press and hold SW1, then connect the power adaptor to the device (while pressing). 2. Hold SW1 until a green LED turns on. It will enter Access Point mode. The Access Point setting are: a. SSID: "RolbitSetAP"...
Page 5
5. Fill your Home SSID and Password. Server IP should be the IP of the Controller. Server Port should be 7433. NOTE: You can only connect the ACWand to a 2.4GHZ Wi-Fi network. The name of the network should be without spaces. 6. Press and hold SW1 and click Send.
The ACWand uses Wi-Fi connection to connect and pair with the Wanderfull controller. To pair the unit with the system, follow these steps: 1. When logged in with a TECH user to the TouchWand app, go to Settings → ACWand. 2. Check 'Enable connection'.
Specifications & Part Numbers Temperature 10°C to 30°C measurements range Power supply Operating temperature 5°C to 40°C Accuracy 3% + 0.5°C Enclosure rating IP20 for indoor Certification Wireless range 100 Ft Frequency 2.4GHZ Wi-Fi security Connection to the network is open. Data in the controller and the cloud is secured.
The manufacturer TouchWand Ltd. declares under our sole responsibility that the product: Marketing model: TouchWand ACWand Trade/Brand name: ACWand™ Changes or modifications not expressly approved by TouchWand Ltd. for compliance could void the user’s authority to operate the equipment. Page 8 of 8...