Table of Contents
Advertisement
It is important to enter the SSID that was located on the back of the controller and the
start and end address for the LAN. After entering all other necessary data click on the Save
& Apply button.
In the Network configuration submenu, additional information for the connection status
- MAC address, Local IP and Remote IP address is added. There is also a possibility to
refresh the data by clicking on the Refresh button.
General settings - Green construction and energy consumption
TouchWand management system is designed to provide data on energyconsumption in
the building or at home.
To use this feature, the end units must include the option to provide energy
consumption data.
There are several processes to follow:
• On the energy screen, select the setting - Energy Options
Wanderfull Technical Manual
45
Advertisement
Table of Contents
