TouchWand Wanderfull User Manual page 53

Once the system is connected to the cloud services, every day at 3 AM a complete backup
procedure is performed automatically for the entire management system.
The purpose of the backup is to create an option to restore the system settings and units
from the cloud.
If a unit is damaged for anyreason, the installer can reach the customer's home with
another unit, and using a name and password to upload the whole system within a short
period of time.
The data backed up includes the names of the units, rooms and groups defined in the
system, the scenarios that were built, the appropriate version, the client updates and
alerts, user names, and user types in the system hierarchy.
Attention should be paid to a customer who chooses to enter using a fixed IP address,
and not via cloud services, it is required to back up the controller via USB backup. In this
case, uploading the latest version depends on the client and his backup time.
In the application this can be done by clicking on two buttons as seen in the picture above:
Create backup to Cloud and Create backup to USB.
If you choose for example the option Create backup to Cloud, one warning message will
appear in the application.
By confirming this message, another one is going to appear while backing the controller.
Uploading from a backup can be done when installing a new controller for your home or
office network. Then enter the ADMIN username and password.
Wanderfull Technical Manual
53