[109] Expansion Card / Unit Type
Description
Assigns the type of expansion cards/units to be used in the Master and Slave Systems. This
allows the system to identify the card and/or unit in each expansion location.
Selection
KX-TD816
• Master
• Areas 1; 2 =
S (2S0) / S2 (6S0) / E1 (EXT1)
KX-TD1232
• Master / Slave
• Areas 1; 2; 3 =
S (2S0) / S2 (6S0) / S3 (1PRI) / E1 (EXT1) / E2 (EXT2)
Default
KX-TD816 – S; E1
KX-TD1232 – Master and Slave – S; E1; E2
Programming
1.
Enter 109.
Display: Expansion Card
2.
Press NEXT to programme Master System.
To program "Slave," press NEXT twice.
Display example: Master: S; E1; E2
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Repeat steps 4 and 5 until the all the required entries are completed.
7.
Press STORE.
If only one system is in operation, go to step 8.
8.
Press NEXT to programme Slave System.
Display example: Slave: S; E1; E2
9.
Repeat steps 3 through 7.
10.
Press END.
General Programming
.
2.2 System Programming
83