[511] Door Opener Access
Description
Enables or disables to unlock the door opener by feature number on a Class of Service (COS)
basis.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS – Enable
Programming
1.
Enter 511.
Display: Door Opener
2.
Press NEXT.
Display: COS No?->
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Feature References
Door Opener
General Programming
( =all COS)
key at step 3. In this case, the display shows the
2.6 COS Programming
217