2.7 Extension Programming
[615-616] Outgoing Permitted CO Line Assignment – Day / Night
for ISDN Extension
Description
Determines the CO lines which can be accessed by an ISDN extension in both day and night
modes. The extension users can make outgoing outside calls using the assigned CO lines.
Selection
• Port number:
KX-TD816 – 01 through 04,
KX-TD1232 – 03 through 06, 09 through 12,
( =all ports)
• CO number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all CO lines)
• Enabl (enable) / Disab (disable)
Default
All ports – all CO lines – Enabl — Day / Night
Programming
1.
Enter a program address (615 for day or 616 for night).
Display example: CO Out (ISDN) Day
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #03:Al01:Enabl
4.
Enter the desired CO line number, or keep pressing
displayed.
To change the current entry, press the new number.
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To programme another jack, press NEXT or PREV, or SELECT and the desired port
number.
8.
Repeat steps 4 through 7.
9.
Press END.
250
or
until the desired CO line is
General Programming