Panasonic KX-TD1232NE Programming Manual page 104

2.2 System Programming
8.
Repeat steps 3 through 5 to enter another jack number.
9.
Press STORE.
10.
Press END.
KX-TD1232
1.
Enter 126.
Display: VM Port Asn
2.
Press NEXT to programme the Master System.
Display example: Mast.1:# # #
3.
Enter a jack number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new jack number.
4.
Press
5.
Repeat steps 3 through 4 to enter another jack number.
6.
Press STORE.
7.
Press NEXT to programme another jack number.
Display example: Mast.2:# # #
8.
Repeat steps 3 through 5 to enter another jack number.
9.
Press STORE.
10.
Press NEXT to programme the Slave System.
Display example: Slav.1:# # #
11.
Repeat steps 3 through 5 to enter another jack number.
12.
Press STORE.
13.
Press NEXT to programme another jack number.
Display example: Slav.2:# # #
14.
Repeat steps 3 through 5 to enter other jack numbers.
15.
Press STORE.
16.
Press END.
Conditions
• A maximum of six jacks can be assigned (twelve jacks during System Connection for KX-
TD1232).
• Neither Jack number 01 nor the manager extension can be assigned as a voice mail port
jack.
• The jack numbers correspond to the voice mail port in numerical order. Example: Stored
jack numbers: Jacks 02, 03, 05, 08, 11, 13
Jack 02=Voice mail numbers 01, 02; Jack 03=Voice mail numbers 03, 04; Jack 05=Voice
mail numbers 05, 06; Jack 08=Voice mail numbers 07, 08; Jack 11=Voice mail numbers 09,
10; Jack 13=Voice mail numbers 11, 12
104
to enter another jack number.
General Programming