2.1 Manager Programming
[014] Budget Management on ISDN Port
Description
Assigns the charge limitation of a call on the ISDN port basis.
Selection
• Port number:
KX-TD816 – 01 through 04,
KX-TD1232 – 03 through 06, 09 through 12,
( =all ports)
• Charge limitation (Charge):
0 through 99999999
Default
All ports – 0
Programming
1.
Enter 014.
Display: ISDN Charge Lim.
2.
Press NEXT.
Display: Port No?
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #03: 0
4.
Enter a charge limitation.
To delete the charge limitation, press CLEAR.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• If the charge limitation is set "0," no restriction is applied.
• To assign all port to one selection, press the
In this case, the display shows the contents programmed for a first port.
• In case of the KX-TD1232, port numbers 03 through 06 are for the Master System and 09
through 12 are for the Slave, if available.
56
key in step 3.
General Programming