Hunting Overflow - Panasonic KX-TD1232NE Programming Manual

2.2 System Programming

[133] Hunting Overflow

Description
Assigns the limited number of a queue and the management of an incoming call when the
queue is full. There are three types of management mentioned below:
Overflow:
Busy Tone:
No:
Selection
• Hunting group number: 01 through 32
• Call management: OVF (Overflow) / Busy (Busy Tone) / No
• The number in the queue: 0 through 8, 1 digit
Default
All hunting groups – Busy, 0
Programming
1.
Enter 133.
Display: Hunt Overflow
2.
Press NEXT.
Display: Group No?
3.
Enter a hunting group number.
To enter hunting group number 01, you can also press NEXT.
Display example: 01:Busy ,0
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press
6.
Enter the number in the queue.
To change the current entry, press CLEAR and the new number.
7.
Press STORE.
116
When the queue is full, a new incoming call is transferred to the Intercept
destination for the group. If the number in the queue is assigned as "0" and
all extensions are busy or logout, the call is transferred to the Intercept
destination for the group.
This assignment is available only when the call is made through an ISDN
line or intercom call. If the queue is full, a busy tone is sent to a caller. If
the number in the queue is assigned as "0" and all extensions are busy or
logout, a busy tone is sent to the caller.
As the queue is treated as infinite, overflow will not occur and a busy tone
will not be sent. The call will be kept waiting until an extension in the
group becomes idle (or logs in). IRNA starts.
.
General Programming