Panasonic KX-TD1232NE Programming Manual page 233

Conditions
• In case of the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33
through 64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number" in Section
1.3 Programming Ways.
• To assign all jacks or all CO lines to one selection, press the key at step 3 or step 4. In these
cases, the display shows the contents programmed for Jack 01 or for CO line 01.
• There are six notification methods:
a)
Immediate ringing: rings immediately
b)
2 ring delay
c)
4 rings delay
d)
6 rings delay
e)
8 rings delay
f)
No ring: only the indicator flashes
g)
Disable: no incoming call
• When you change the jack number by pressing NEXT or PREV, the CO line group number
is not changed. Example #03-1:CO06.....Press NEXT.....#03-2:CO06
Feature References
Direct In Lines (DIL)
Night Service
Ringing, Delayed
General Programming
2.7 Extension Programming
233