Co Line Name Assignment - Panasonic KX-TD1232NE Programming Manual

2.5 CO Line Programming

[421] CO Line Name Assignment

Description
Assigns names of company or customer to each CO line so that the operator or the extension
user can find the destination to which the caller tries to reach, before answering.
Selection
• CO line number:
KX-TD816 – 01 through 08
KX-TD1232 – 01 through 54
• Name: 10 characters (max.)
Default
All CO lines – Not Stored.
Programming
1.
Enter 421.
Display: CO-Name
2.
Press NEXT.
Display: CO Line NO.?
3.
Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01: Not Stored.
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5.
Press STORE.
6.
To programme another CO line, press NEXT or PREV, or SELECT and the desired CO
line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• In case of the KX-TD1232, CO01 through CO12 are for the Master System and CO13
through CO24 are for the Slave, if available.
• If the KX-TD290 is installed to the KX-TD1232 Master System, CO25 through CO54
become available.
170 General Programming