Ucd Time Table Assignment - Day / Night - Panasonic KX-TD1232NE Programming Manual

[137-138] UCD Time Table Assignment — Day / Night
Description
Assigns the Time Table when all extensions in the Uniform Call Distribution (UCD) group are
busy.
Selection
• UCD group number: 01 through 32
• Time Table number: 1 through 4
Default
All UCD groups – Not Stored
Programming
1.
Enter a program address (137 for day or 138 for night).
Display example: UCD T.Table Day
2.
Press NEXT.
Display: Group No?
3.
Enter a UCD group number.
To enter UCD group number 1, you can also press NEXT.
Display example: UCD01:Not Stored
4.
Enter a Time Table number.
Display example: UCD01:1
5.
Press STORE.
6.
Press END.
Conditions
• If the Time Table number is not assigned, the system will not answer the call and waits for
any extension to become idle. In this case, Intercept Routing – No Answer (IRNA) will be
employed.
Feature References
Uniform Call Distribution (UCD)
General Programming
2.2 System Programming
119