Clip / Colp Number Assignment For Td286 Extension - Panasonic KX-TD1232NE Programming Manual

2.7 Extension Programming

[632] CLIP / COLP Number Assignment for TD286 Extension

Description
Assigns a CLIP/COLP number for KX-TD286 ISDN extension.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• CLIP/COLP number:
16 digits (max.)
Default
All ports – Not Stored
Programming
1.
Enter 632.
Display: TD286 CLIP/COLP
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Not Stored
4.
Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 3 through 6.
8.
Press END.
Conditions
• For KX-TD1232, port number 01 through 06 are for the Master System and 07 through12
are for the Slave, if available.
• To assign all ports to one selection, press the
the contents programmed for the first port.
268
key in step 3. In this case, the display shows
General Programming