(Reserved For Future Use.) First Digit Time - Panasonic KX-TD1232NE Programming Manual

2.3 Timer Programming

[207] (Reserved for future use.) First Digit Time

Description
Sets the maximum time allowed between the start of outside dial tone and the first digit dialled
on an outgoing outside call. If an extension user fails to dial any digits during this time, the
DTMF receiver is released.
Selection
Time (seconds): 5 through 120
Default
5 s
Programming
1.
Enter 207.
Display: 1st Digit Time
2.
Press NEXT.
Display example: Time: 5 s
3.
Enter the time.
To change the current entry, press CLEAR and the new time.
4.
Press STORE.
5.
Press END.
Conditions
• This timer is used for toll restriction checking.
• You cannot leave the entry empty.
Feature References
Toll Restriction
132 General Programming