Expansion Unit Type - Panasonic KX-TD816JT Programming Manual

1.1 DECT Programming

[109] Expansion Unit Type

Description
Assigns the type of expansion units to be used in the Master and Slave Systems. This allows
the system to identify the unit in each expansion location.
Selection
KX-TD816
• Areas 1; 2 = C (4CO) / S1 (2S0) / S2 (6S0) / EM(4E&M) / E (EXT) /
D (No Use)
KX-TD1232
• Master / Slave
• Areas 1; 2; 3 = C (4CO) / S1 (2S0) / S2 (6S0) / S3 (1PRI) / EM (4E&M) / E1 (EXT1) /
E2 (EXT2) / D (No Use)
(Master system only: S3, E1 and E2 for the KX-TD144 or KX-TD146)
Default
KX-TD816 – C; E
KX-TD1232 – Master and Slave – C; E1; E2
Programming
1.
Enter 109.
Display: MODULO ESPANS
2.
Press NEXT to program Master System.
To program "Slave," press NEXT twice.
Display example: MASTER: C; E1; E2
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Repeat steps 4 and 5 until the all the required entries are completed.
7.
Press STORE.
If only one system is in operation, go to step 8.
8
.
DECT Programming