[802] System Data Printout
Description
Starts or stops printing of the system data. All the current system-programmed data is printed
out.
Selection
Start / Stop
Default
Not applicable.
Programming
1.
Enter 802.
Display: System Data Dump
2.
Press NEXT.
Display: Print-Out: Start
3.
Press STORE to start printing.
Printing starts.
To stop printing in the middle of printing, press SELECT and go to step 4.
When printing is completed, the display shows:
Display: Print-Out:Finish
4.
Press STORE.
Display: Print-Out:Stop
5.
Press END.
Conditions
You may stop printing by pressing the END button, while records are being printed out.
Feature References
Station Message Detail Recording (SMDR)
General Programming
2.8 Resource Programming
273