2.2 System Programming
[150] ISDN DDI Translation Table
Description
Assigns a destination location of incoming DDI numbers.
Incoming DDI numbers are received at extensions assigned to each location number.
Selection
• Location number: 000 through 399
• DDI number: 16 digits max.
Default
All locations – Not Stored
Programming
1.
Enter 150.
Display: DDI Assign
2.
Press NEXT.
Display: Location No?
3.
Enter a location number.
To enter location number 000, you can also press NEXT.
Display example: 000:Not Stored
4.
Enter a DDI number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another location, press NEXT or PREV, or SELECT and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The DDI number can be a maximum of 16 digits. Valid numbers are from 0 to 9.
• Programmes [151-152] ISDN DDI Ringing Assignment — Day / Night are used to assign
an extension to each location number in the day and night modes.
• This programme becomes available when "DDI" is selected in program [420/429] ISDN
Ring Service Assignment — Day / Night.
122
General Programming