Panasonic KX-TD1232NE Programming Manual page 14

1.2 Using the Proprietary Telephone
Viewing the Display
The display gives you helpful information, such as what you should do now, what you have
done, etc..
The KX-T7533, KX-T7536, KX-T7230 and the KX-T7235 utilize two information lines for
programming. The upper line is called the Message Line and the lower one is called the
Function Line.
The Message Line (upper) shows you what you should do or what you should select. It also
allows you to confirm what you have just entered. The display capacity is 16 digits. If your
entry exceeds the capacity, you can shift the display by pressing
The Function Line (lower) shows the current function of the soft buttons. These functions
change with the programming procedures.
SYS-PGM NO? →
CLR NEXT
KX-T7533 Display
SYS-PGM NO? →
CLR NEXT
KX-T7230 Display
Before entering the programming mode
Before entering programming mode, confirm that:
• Your telephone is on-hook.
• No calls are on hold at your telephone.
Entering the programming mode
To programme any programminge mode:
Press PROG. +
(default=1234).
• The display shows the Initial Message: SYS-PGM NO? ->
To enter the only Manager Programming mode from any digital proprietary telephone (User
Programming):
Press PROG. +
(default=1234).
• The display shows the Initial Message: MNG-PGM NO? ->
14
← Message Line
← Function Line
← Message Line
← Function Line
+ # and enter your System Password
+ and enter your User Password
SYS-PGM NO? →
CLR NEXT
KX-T7536 / KX-T7235 Display
or button.
← Message Line
← Function Line
General Instructions