2.7 Extension Programming
2.7 Extension Programming
[600] EXtra Device Port
Description
EXtra Device Port (XDP) allows a single line telephone (SLT) to be connected to the same jack
as a proprietary telephone (PT) or Console. This programme assigns which jacks are XDP. The
SLT and the PT / Console of the programmed jack work as independent extensions.
Selection
• Jack number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jacks)
• Enable / Disable
Default
All jacks – Disable
Programming
1.
Enter 600.
Display: XDP Assign
2.
Press NEXT.
Display: Jack NO ?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01: Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• In case of the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33
through 64 are for the Slave, if available.
226
General Programming