Voice Mail Access Codes - Panasonic KX-TD1232NE Programming Manual

2.7 Extension Programming

[609] Voice Mail Access Codes

Description
Assigns a mailbox number for each extension, only if programme [990] System Additional
Information, Area 02 – bit 8 is set to "free".
Selection
• Jack number:
KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
(-1 = first part, -2 = second part)
• Mailbox number:
16 digits (max.)
Default
All jacks – Not Stored
Programming
1.
Enter 609.
Display: Mailbox ID Code
2.
Press NEXT.
Display: Jack NO ?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display example: #01-1:Not Stored
4.
Enter the mailbox number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• In case of the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33
through 64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
238 General Programming