4.3
System Programming
Description
Selection
Default
Programming
Expansion Unit Type
Assigns the type of expansion units to be used in the system.
This allows the system to identify the unit in each expansion unit
location.
KX-TD816
• Areas 1; 2 = C (4 CO) / S1 (2 S0) / S2 (6 S0) / EM(4 E&M) /
E (EXT)/ A (16 SLT)
KX-TD1232
• Master / Slave
• Areas 1; 2; 3 = C (4 CO) / S1 (2 S0) / S2 (6 S0) / EM(4 E&M) /
E1 (EXT1)/ E2 (EXT2)/ A1 (16 SLT1) /
A2 (16 SLT2)
KX-TD816: C;E
KX-TD1232: Master and Slave – C;E1;E2
KX-TD816
1.
Enter 109.
Display: Expansion Card
2.
Press NEXT.
Display example: Master:C ;E
3.
Keep pressing SELECT until the desired selection of Area 1
is displayed.
4.
Press
to program Area 2, if required.
5.
Keep pressing SELECT until the desired selection of Area 2
is displayed.
6.
Press STORE.
7.
Press END.
KX-TD1232
1.
Enter 109.
Display: Expansion Card
2.
Press NEXT to program the Master System.
To program the "Slave", press NEXT again.
Display example: Master:C ;E1;E2
109
69