2.6 COS Programming
[514] Do Not Disturb for Direct Dialling In Call
Description
Enables or disables to reject Direct Dialling In call on a Class of Service (COS) basis.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS – Disable
Programming
1.
Enter 514.
Display: DND for DDI
2.
Press NEXT.
Display: COS No?->
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
• The operator extension can switch the mode regardless of setting.
Feature References
Do Not Disturb for Direct Dialling In Call
220
( =all COS)
key at step 3. In this case, the display shows
General Programming